Along with the above video, we have included below a few drawings of the WorkShell shelter assembled onto a single shipping container. It's important to remember that this outdoor shelter is not limited to only being assembled onto one shipping container. It can also be assembled onto two shipping containers and can also be assembled onto any suitable supporting walls or supports.
The WorkShell comes flat-packed in crates. The WorkShell shelter is a fully modular system, so you can choose if you want your shelter structure to have solid steel sheeting or a soft PVC cover. Also, depending on how you plan to use this storage structure, you can choose to close off the front and back of the unit.
Another major point with the WorkShell shelter is that if you are assembling the structure onto shipping containers, the unit can be secured using our specially designed container top clamps which mean you will not damage the shipping containers when fixing the framework to them - this means you can use rented shipping containers as well as purchased ones.
Please do contact us if you have any questions etc.
Thanks again. Enjoy.
Framework - on one shipping container
Framework with Steel Sheeting - on one shipping container
Framework with PVC cover - on one shipping container
Key Size Info:
Length: sold in 20 ft (6m) sections
Width: 20 ft (6m)
Roof Side Height: 60cm | Roof Peak Height: 180cm | Sidewall Height: 240cm
Total height including sidewall or shipping container: 440cm
Door opening on frontwall: 298cm x 327cm
Key Material Specification info:
Complies with American IBC regulations and standards as well as EN and ISO standards.
The steel framework is made from galvanized ASTM A283 Gr. B (ENS185 / EN10025-2 / DIN ST33 / S235JR) 60 x 60 x 1.8mm, and ASTM A36 grade (ENS235J2 / EN10025-2 / S275JR) 60 x 60 x 1.8mm cold-roll profiles. All steel is galvanized to ASTM A123 standards (ISO 1461).
The PVC cover is made from 610g reinforced PVC and is flame retardant to ASTM E136, ASTM E84, NFPA 701, and DIN 4102-1 class B2 standards. The PVC tensile strength warp is 2965 N, and weft is 2282 N. The tear resistance warp is 456 N, and weft is 314 N. The temperature resistance of the PVC is -30 to +70 °C.
The steel sheeting is made from coated, cold rolled 0.5-0.6mm custom formed steel panels. The colored coating is a metallic paint with three additional layers including a primer, and a chemically hardened finishing coat. Certified to ISO9001 standards.
All bolts and nuts are made to ISO 898 standards.